Installation – Easy Wall Mount

Patent Pending

Instructions

1. Find the stud located where you want to hang your tv

2. Attach the wall hook using the wood screws to the stud

3. Attach the TV Wire Mount to the back of the TV using the screws supplied by the TV manufacturer or the ones supplied. Only screw in until finger tight

4. DO NOT OVER TIGHTEN the screws as this may cause damage to the TV. The mounts may not be tight against the back of the TV when the screws are inserted, that is OK.

5. Hang the TV from the wall hook. Two people are recommended to avoid injury or damage to the TV. Adjust the TV so it is horizontal – just like a picture

6. When adding or removing cords, have a second person hold the TV while one side is slightly pulled away from the wall to access the ports. In some cases, you may need to take the TV off the wall, insert cords and rehang depending on port location.

WARNING: We are not responsible for TV’s that are hung from drywall where the hook being used is not firmly attached to the stud behind the drywall. The TV Wire Mount is rated to hold 200lbs assuming a 200lb rated wall hook is used and properly attached to the wall

https://youtu.be/bVpIG6F7Iuchttps://www.youtube.com/watch?v=TUdbN2oGNgk&t=1s

Easy Wall Mount
P.O. Box 90336, Henderson NV 89009